NeverSink's LOOTFILTER v8.13.x♦ in-depth ♦ endgame+leveling 2in1 ♦ user-friendly ♦ SC/HC versions

"

lucas_zabeu wrote:

Neversink, I have my own lootfilter customized by myself, however, since patch 2.4 I'm with some bugs when dropping Shaped Maps. Can you help me please?

Here is a screenshot: Shaped maps looks like they are they normal tiers, not the high tiers.

This is huge because I have different sounds/filter for different tiers.

For example: "Beach" map Tier 2 looks small and white.

"Shaped Beach Map" SHOULD look like a Tier 7 map, green and medium size, similar to this Reef map. But it still shows small and white, as it was a Tier 2 map.

In this screenshot: Reef Map(T8) and Shaped Beach Map(T7) should looks almost the same, it's what I configured on the filter. However Shaped maps still looks small and white as Low tier. =/

Any tip Will be welcome. Thank u.

"

Hellcat5 wrote:

"

lucas_zabeu wrote:

Neversink, I have my own lootfilter customized by myself, however, since patch 2.4 I'm with some bugs when dropping Shaped Maps. Can you help me please?

Here is a screenshot: Shaped maps looks like they are they normal tiers, not the high tiers.

This is huge because I have different sounds/filter for different tiers.

For example: "Beach" map Tier 2 looks small and white.

"Shaped Beach Map" SHOULD look like a Tier 7 map, green and medium size, similar to this Reef map. But it still shows small and white, as it was a Tier 2 map.

In this screenshot: Reef Map(T8) and Shaped Beach Map(T7) should looks almost the same, it's what I configured on the filter. However Shaped maps still looks small and white as Low tier. =/

Any tip Will be welcome. Thank u.

If you have shaped dunes map block below dunes map block, it will always show it as the lower tier. Check your precedence. :)

I believe when you shape a map, the dropLevel increases. I have my map blocks setup with droplevel to identify their tiers instead of using map name. Perhaps that could resolve your issue?


Best,
hellcat5

"

lucas_zabeu wrote:

Well probably it can, but I have no idea what you talking about with "block maps setup" xD

I usually edit my filter editing the maps names, you're right.

My map section on filter is somethign like this: [...sinp...]


and keep going til tier 16...

So, is that wrong now or what? It used to work perfect before 2.4, but now with shaped maps I'm kinda lost on filtering maps.

Would u mind to copy/past your map section here? I mean, your shaped maps looks like they matching Tier? :)

thank you.

"

Show # Maps:T2
Class Maps
BaseType "Beach" "Factory" "Ghetto" "Oasis"
SetFontSize 35
PlayAlertSound 4 300
SetTextColor 255 255 255
SetBackgroundColor 0 0 0

Show # Maps:T7
Class Maps
BaseType "Shaped Beach" "Arachnid Tomb" "Castle Ruins" "Catacombs" "Cells" "Armory" "Ashen Wood" "Mud Geyser"
SetFontSize 40
PlayAlertSound 4 300
SetTextColor 0 255 0
SetBorderColor 192 192 192
SetBackgroundColor 0 0 0

"

Hellcat5 wrote:

"

lucas_zabeu wrote:

Well probably it can, but I have no idea what you talking about with "block maps setup" xD

I usually edit my filter editing the maps names, you're right.

My map section on filter is somethign like this: [...sinp...]


and keep going til tier 16...

So, is that wrong now or what? It used to work perfect before 2.4, but now with shaped maps I'm kinda lost on filtering maps.

Would u mind to copy/past your map section here? I mean, your shaped maps looks like they matching Tier? :)

thank you.

Each "Show" section is a block. You have the wrong precedence setup for shaped maps. You must order the map tiers backwards to avoid this. I'll try to explain:

"

Show # Maps:T2
Class Maps
BaseType "Beach" "Factory" "Ghetto" "Oasis"
SetFontSize 35
PlayAlertSound 4 300
SetTextColor 255 255 255
SetBackgroundColor 0 0 0

Show # Maps:T7
Class Maps
BaseType "Shaped Beach" "Arachnid Tomb" "Castle Ruins" "Catacombs" "Cells" "Armory" "Ashen Wood" "Mud Geyser"
SetFontSize 40
PlayAlertSound 4 300
SetTextColor 0 255 0
SetBorderColor 192 192 192
SetBackgroundColor 0 0 0

in the above, we can see that "Beach" exists for t2, and "Shaped Beach" exists for t7. The problem is that since Tier 7 exists below Tier 2 in the code, "Beach" will always be detected over Shaped Beach" and thus qualify it as a tier 2 first because "Shaped Beach" contains "Beach". To resolve these issues, order the maps backwards from t16 to t1.

I have 4 tiers setup to match the number in game, and I include a 5th for map fragments and other map types like Offering to the Goddess. Here's the paste from my map tiering section:

Spoiler

#************************
# map device items
#************************
# map drops - magenta background black text - ultra tier
Show
Class Maps
DropLevel >= 83
SetFontSize 45
SetTextColor 0 0 0
SetBorderColor 230 0 180
SetBackgroundColor 230 0 180
PlayAlertSound 7 200

# map drops - magenta background black text - top tier
Show
Class Maps
DropLevel >= 78
DropLevel <= 82
SetFontSize 45
SetTextColor 0 0 0
SetBorderColor 200 0 150
SetBackgroundColor 200 0 150
PlayAlertSound 7 200

# map drops - magenta background black text - middle tier
Show
Class Maps
DropLevel >= 73
DropLevel <= 77
SetFontSize 40
SetTextColor 0 0 0
SetBorderColor 200 0 150
SetBackgroundColor 200 0 150
PlayAlertSound 7 150

# map drops - magenta background black text - low tier
Show
Class Maps
DropLevel >= 58
DropLevel <= 72
SetFontSize 40
SetTextColor 0 0 0
SetBorderColor 170 0 120
SetBackgroundColor 170 0 120

# map fragments and other map types - magenta black text
Show
Class Map
SetFontSize 45
SetTextColor 0 0 0
SetBorderColor 230 0 180
SetBackgroundColor 230 0 180
PlayAlertSound 7 150

I hope this helps. Feel free to use it, modify it, whatever. :)