[Item Filter] One Filter to Rule Them All 4.9.2 (Updated 2021-10-25 / EOL)

Magic jewelry is hidden if they have an itemlevel equal to or higher than 68 by default.

If you would like to show them, you can replace:

"Hide #Amulets, Rings, Belts - Magic 68+" with "Show #Amulets, Rings, Belts - Magic 68+"

Let me know how it goes.
One Filter to Rule Them All: https://www.pathofexile.com/forum/view-thread/1259059
"
Muldini wrote:
Magic jewelry is hidden if they have an itemlevel equal to or higher than 68 by default.

If you would like to show them, you can replace:

"Hide #Amulets, Rings, Belts - Magic 68+" with "Show #Amulets, Rings, Belts - Magic 68+"

Let me know how it goes.

Oh okay. Thanks for the very fast reply. I was just wondering if this was intentional or not. Your loot filter is number one!
Possible to have sound added when currency(fusing, orbs etc.) drop?
Certainly, just have a look at the currency section (search for "### Currency"). There are existing blocks that have an AlertSound. You can simply copy that line and apply it where you want it.

I'm not gonna add it as a default because I think enough stuff is hidden that most of the remaining (shown) items are already standing out without any highlights/sounds.
One Filter to Rule Them All: https://www.pathofexile.com/forum/view-thread/1259059
Sorry if this has already been addressed, I'm not quite sure of a quick way to search the thread..

How would I go about changing the chromatic orb recipe filter to show all sized items?
I need them real real bad v_v
Using this currently, and it's great, can't stop farming
"
madkittymk2 wrote:
Sorry if this has already been addressed, I'm not quite sure of a quick way to search the thread..

How would I go about changing the chromatic orb recipe filter to show all sized items?
I need them real real bad v_v


It does that by default.

"
Unrealism wrote:
Using this currently, and it's great, can't stop farming

Thank you :)
One Filter to Rule Them All: https://www.pathofexile.com/forum/view-thread/1259059
"
Muldini wrote:
It does that by default.


Oh, apologies, I misread it then.
Thank you for the quick reply. :)
"
Muldini wrote:
"
thevdende wrote:
I've been trying to get it to hide normal, >i75 jewellery (so any jewellery that is lower than i75) but I can't get it to work (I went to the jewllery section and changed the 68 into 75).

Jewelery:
"Show #Amulets, Rings, Belts - Normal 68+" to "Hide #Amulets, Rings, Belts - Normal 68+"
"Show #Amulets, Rings, Belts - ~CatchAll" to "Hide #Amulets, Rings, Belts - ~CatchAll"

You would still need to adjust the itemlevel of the blocks above that to 75 for now. The next version will have 75 as a default for white/magic jewelery.

Be aware that you effectively set the "CatchAll" block to hide at the end. I've never tested that, it is not recommended. Double check by putting jewelery on the ground to check it works as you expect.

"
thevdende wrote:

I also couldent get it to show ilvl 77+ harbinger bows, or ambushers. I changed "Hide" to "Show" in endgame weapon section for daggers and bow, reloaded the filter but it still didn't show those bases. Why would the amount of sockets in high ilvl bases matter anyway? it should always show T1 i77+ bases imo, or have an option to enable them. Any help mucho appreciado.


To answer the part about why "sockets matter".

Obviously it's not the sockets themselves that are of interest, it's just we don't have a whole lot of other conditions to reduce the clutter. From experience people are mostly interested in a subset of available bases. So we can either show them all by default and have a screen full of whites again, or reduce the clutter overall and implement options to show specific (or even all of them if you wish) bases.

In your case, change:

"Hide #Gear - LowDisplayReq - Endgame - Weapon - Bows - Harbinger Bow" to "Show #Gear - LowDisplayReq - Endgame - Weapon - Bows - Harbinger Bow"

and

"Hide #Gear - LowDisplayReq - Endgame - Weapon - Daggers - Ambusher" to "Show #Gear - LowDisplayReq - Endgame - Weapon - Daggers - Ambusher"

You find all of these toggles in the custimization section at the beginning of the filter.

There needs to be a tab between "Hide/Show" and "#Gear". The forum will display it as a space I think. Make sure you use the "Replace all" function in your editor as these may occur multiple times. Alternatively you could use Filtration and toggle this on the right side of the GUI in the "Blockview".


Took me a bit of fiddling but it works, I dropped i74 ring and it didnt show but the i75 did. This is super helpfull when your running 73-74 maps. Great work man, thx again!
"
thevdende wrote:

Took me a bit of fiddling but it works, I dropped i74 ring and it didnt show but the i75 did. This is super helpfull when your running 73-74 maps. Great work man, thx again!


Did you see that ilvl 77+ (75+ in your case and in the next version) has a brighter text color already? It should already be easy to distinguish them.

Although if you don't need the <75 ones, I guess hiding them is fine as well.

I'm nearly done with the new version, should be ready in the next day or two. So far I've been able to reduce the line count by 50% without losing functionality. In fact I added new features/toggles.
One Filter to Rule Them All: https://www.pathofexile.com/forum/view-thread/1259059

Report Forum Post

Report Account:

Report Type

Additional Info